Produse pentru 0 x pert pro pol (13)

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

COMPOSITION ET ASPECT Produit liquide à base de résine polychloroprène en phase aqueuse. SUPPORTS ADMIS Voir fiche technique. RECOUVREMENT PRIMEO FB peut être recouvert de produits de sols autolissant ou de mortiers colles carrelage. DOCUMENTS À CONSULTER • Norme Française - DTU • Cahiers de Prescriptions Techniques d'exécution en vigueur • Certificat CSTB des produits associés CARACTÉRISTIQUES TECHNIQUES • Aspect : liquide vert • Composition : résine acrylique en dispersion aqueuse et adjuvants spécifiques • Densité : 1.3 • Extrait sec : 52+/-2% • pH : 8 CONDITIONNEMENTS Seau de 15 L Seau de 5 L. STOCKAGE 12 mois en emballage d’origine non entamé stocké à l’abri du gel. PRÉCAUTION D'EMPLOI Température d'application : +5 à +30°C. Ne pas appliquer en plein soleil, sur support chaud, gelé ou s'il y a un risque de gel dans les heures qui suivent l'application. PRÉPARATION DES SUPPORTS Voir fiche technique. CONSOMMATION 50 à 150 g/m² selon la porosité du...

Pipette Tip 50-1000 PP (blue)

PX 08 jest jednoskładnikowym, bezbarwnym, szybko wysychającym podkładem poliuretanowym do gruntowania niechłonnych podłoży przed nałożeniem powłok antygraffiti w celu zwiększenia ich przyczepności do podłoża. Po wyschnięciu tworzy elastyczny i przejrzysty film izolujący, który jest mało widoczny lub całkowicie niezauważalny w zależności od rodzaju podłoża, nasłonecznienia i kąta padania światła. Preparat posiada doskonałe właściwości adhezyjne. PX 08 służy do stosowania na powierzchniach niechłonnych typu farby proszkowe, laminaty poliestrowe oraz do większości tworzyw sztucznych i innych trudno przyczepnych podłoży. Preparat może być również stosowany pod aplikację innych powłok malarskich. 

Besonders geeignet zur Behandlung von wenig bis stark exsudierenden akuten Wunden wie Operations- und Unfallwunden sowie chronische Wunden wie Ulcus cruris venosum, Dekubitus oder das diabetische Fußsyndrom. Tragedauer bis zu 7 Tage.

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing Pre-treatment (surface):sealable, different pre-treatments

YÜKSEK ESNEK KABİLİYETİ VE ALT YÜZEYE MÜKEMMEL YAPIŞMA PERFORMANSI GİBİ ÖZELLİKLER MEVCUTTUR

Sheets and rods.

Sicher - Schnell - Einfach, das sind die herausragenden Eigenschaften des KURO PEHD Erdrohrprogramms. Die einzige, absolut wasserdichte Rohrpost-Erdleitung, die kein Fahrrohr benötigt, da die Büchsen direkt in den Sonderabmessungen fahren. Abmessung::NW 90 / NW 110 / NW 160 Länge Standard::5000 mm Material::Polyethylen hoher Dichte Farbe::königsblau Sonderanfertigung:auf Anfrage

Tissu 67% COTON 33% POLYESTER IR, chaine & tram e Retors, arm ure toile 1/1, 190g/m2, 150cm, nonimper Principales utilisations:foulards m ilitaires, tentes legeres et cam ouflage lorsque traite 2i

Die Type 261 ist ein reines, ölfreies, modifiziertes PTFE-Pulver, welches mit einem schnell und vollständig verdunstenden Lösemittel auf die zu schmierenden Stellen aufgetragen wird und dort einen trockenen, haftenden Schmierfilm bildet. Die Type 261 fleckt nicht, ist unsichtbar und – wichtig für die Holz- und Möbelindustrie – durchbeizbar.

Pipette Tip 0,1 - 20 PP (crystal)

Thickness range: 25-300 µm monoaxial oriented PP Optics:transparent, white Application:Electrical Industry, Label